Plastic Laser Sintering 3D Printers (P Series)

Prodways' line of commercial grade Plastic Laser Sintering (PLS) 3D printers are the product of its R&D efforts and partnership with Hunan Farsoon Technologies, a manufacturer of SLS equipment and 3d printing materials. Designed for prototyping and short-run manufacturing, the P series accommodates a wide range of applications in aerospace, automotive, healthcare, design and architecture, consumer goods and academia.
ProMaker P1000
  • 300 x 300 x 300 mm
    (11 x 11 x 11 in)
  • 30W Laser power
  • 3.5 m/s (118 in/s) scanning speed
More
ProMaker P2000 SD
  • 250 x 250 x 320 mm
    (9.84 x 9.84 x 12.60 in)
  • 30W Laser power
  • 7.6 m/s (275 in/s) scanning speed
More
ProMaker P2000 HT
  • 250 x 250 x 320 mm
    (9.84 x 9.84 x 12.60 in)
  • 60W Laser power
  • 1.5 l/h (91 in³/h) build rate
More


ProMaker P4500 SD
  • 400 x 400 x 450 mm
    (15.75 x 15.75 x 17.7 in)
  • 30W Laser power
  • 1.5 l/h (91 in³/h) build rate
More
ProMaker P4500 HS
  • 400 x 400 x 450 mm
    (15.75 x 15.75 x 17.7 in)
  • 60W Laser power
  • 2.7 l/h (164 in³/h) build rate
More
ProMaker P4500 X
  • 400 x 400 x 450 mm
    (15.75 x 15.75 x 17.7 in)
  • 100W Laser power
  • 4.0 l/h (219 in³/h) build rate
More
ProMaker P4500 HT
  • 400 x 400 x 450 mm
    (15.75 x 15.75 x 17.7 in)
  • 100W Laser power
  • Max chamber temperature: 220°C (428°F)
More