Bulk density: 1.05 g/cm3
Density of parts: 1.35 g/cm3
Melting Point: 181°C - 183°C
Heat Deflection 1.8 MPa: 116°C
Polymer powders > PA12-GFX 2550

PA12-GFX 2550

A fine composite powder, the PA12-GFX 2550 was developed for complex end-use parts. With properties similar to PP20% injected parts, PA12-GFX 2550 targets a wide range of applications, from military to motorsports, just to name a few.

Features & Benefits

•Fine granulometry #46 µm
•Similar to PP 20% injected parts
•Lowest porosity remaining for a composite
•Refreshing allows a use in continuous sifting-regenerating cycles
•Low operating costs
•Excellent behavior in temperature and good chemical resistance

Compatible with the following ProMaker P models

P2000 SD, P2000 HT, P4500 SD, P4500 HS, P4500 X, P4500 HT

Download specs